Stainless Steel Strip

Stainless steel strip, also called stainless steel strip coil, or stainless steel slitting coil，is a narrow strip coil by slitting from the stainless steel sheet or coil.

Stainless steel strip has the feathers of durable and corrosion-resistant. It is mainly used in construction, manufacturing, home, and commercial cooking equipment and appliances.

Whatsapp Send E-mail

Specification:

A.Precision stainless steel strip

Thickness range: 0.02mm-0.5mm
Thickness tolerance:
Thickness ≤0.1mm ±2.5um
Thickness ≤0.5mm ±5um
Uniformity of hardness: ±10HV
Width tolerance:
Width ≤ 30mm ±0.015mm
Width ≤ 100mm ±0.03mm
Width ≤ 250mm ±0.05mm
Width ≤ 610 mm ±0.1mm
Straightness: 1-2 IU
The burr height and edge quality:
Thickness 0.02mm-0.1mm ≤6%
Thickness 0.1mm-0.5mm ≤5%
Special requirements for burr or round edge
Surface:
TR---Cleaning and degreasing after cold rolling
BA---Bright annealing after cold rolling
Inside diameter: 300/400/508mm
Outside diameter: Max 1500mm

B.Cold-rolled stainless steel strip

Thickness range: ≥0.3mm
Thickness tolerance:
Thickness ≤0.6mm ±40um
Thickness ≤1.0mm ±50um
Uniformity of hardness: No request
Width tolerance: Width ≤ 1524mm ±5mm
Straightness: Min 3 IU
The burr height and edge quality:
Thickness 0.4mm Burr height 0.03mm
Thickness 3.0mm Burr height 0.09mm
No Special requirement to burr or round side
Surface:
TR---Cleaning and degreasing after cold rolling
BA---Bright annealing after cold rolling
Inside diameter: 300/400/508mm
Outside diameter: Max 1500mm

Introduce:

Standard AISI Types of Edges

a.No.1 Round Edge: Approximate radius equal to 1/2the thickness

b.No.2 Mill Edge: Hot rolled or cold rolled edge, naturally formed

c.No.3 Slit Edge: Approximately square edge,slitting burr intact

d.No.4 Round-Cornered Edge: Rounded edge, slitting fracture may be visible

e.No.5 Deburred -Edge: A safety edge--No.3 edge with the slitting burr rolled over

f.No.6 Square Edge: Square with radial corners, a slitting fracture may be visible

Chemical Composition

Type	Grade	Grade	Chemical Component %
Type	Grade	Grade	C	Cr	Ni	Mn	P	S	Mo	Si	Cu	N	Other
Austenitic	201	SUS201	≤0.15	16.00-18.00	3.50-5.50	5.50-7.50	≤0.060	≤0.030	-	≤1.00	-	≤0.25	-
	202	SUS202	≤0.15	17.00-19.00	4.00-6.00	7.50-10.00	≤0.060	≤0.030	-	≤1.00	-	≤0.25	-
	301	1.4310	≤0.15	16.00-18.00	6.00-8.00	≤2.00	≤0.045	≤0.030	-	≤1.00	-	≤0.10	-
	304	1.4301	≤0.07	17.00-19.00	8.00-10.00	≤2.00	≤0.045	≤0.030	-	≤1.00	-	-	-
	304L	1.4307	≤0.030	18.00-20.00	8.00-10.00	≤2.00	≤0.045	≤0.030	-	≤1.00	-	-	-
	304H	1.4948	0.04-0.10	18.00-20.00	8.00-10.00	≤2.00	≤0.045	≤0.030	-	≤1.00	-	-	-
	309	1.4828	≤0.20	22.00-24.00	12.00-15.00	≤2.00	≤0.045	≤0.030	-	≤1.00	-	-	-
	309S	*	≤0.08	22.00-24.00	12.00-15.00	≤2.00	≤0.045	≤0.030	-	≤1.00	-	-	-
	310	1.4842	≤0.25	24.00-26.00	19.00-22.00	≤2.00	≤0.045	≤0.030	-	≤1.50	-	-	-
	310S	*	≤0.08	24.00-26.00	19.00-22.00	≤2.00	≤0.045	≤0.030	-	≤1.50	-	-	-
	314	1.4841	≤0.25	23.00-26.00	19.00-22.00	≤2.00	≤0.045	≤0.030	-	1.50-3.00	-	-	-
	316	1.4401	≤0.08	16.00-18.50	10.00-14.00	≤2.00	≤0.045	≤0.030	2.00-3.00	≤1.00	-	-	-
	316L	1.4404	≤0.030	16.00-18.00	10.00-14.00	≤2.00	≤0.045	≤0.030	2.00-3.00	≤1.00	-	-	-
	316Ti	1.4571	≤0.08	16.00-18.00	10.00-14.00	≤2.00	≤0.045	≤0.030	2.00-3.00	≤1.00	-	0.1	Ti5（C+N)~0.70
	317	*	≤0.08	18.00-20.00	11.00-15.00	≤2.00	≤0.045	≤0.030	3.00-4.00	≤1.00	-	0.1	-
	317L	1.4438	≤0.030	18.00-20.00	11.00-15.00	≤2.00	≤0.045	≤0.030	3.00-4.00	≤1.00	-	0.1	-
	321	1.4541	≤0.08	17.00-19.00	9.00-12.00	≤2.00	≤0.045	≤0.030	-	≤1.00	-	-	Ti5（C+N)-0.70
	321H	*	0.04-0.10	17.00-19.00	9.00-12.00	≤2.00	≤0.045	≤0.030	-	≤1.00	-	-	Ti5（C+N)~0.70
	347	1.4550	≤0.08	17.00-19.00	9.00-12.00	≤2.00	≤0.045	≤0.030	-	≤1.00	-	-	Nb≥10*C%-1.10
	347H	1.494	0.04-0.10	17.00-19.00	9.00-12.00	≤2.00	≤0.045	≤0.030		≤1.00	-	-	Nb≥10*C%-1.10
	XM-19	Nitronic50	≤0.06	20.50-23.50	11.50-13.50	4.0-6.0	≤0.045	≤0.030	1.50-3.00	≤1.00	-	0.2-0.4	Nb：0.10-0.30 V：0.10-0.30
	904L	N08904	≤0.02	19.0-23.0	23.0-28.0	4.0-5.0	≤0.045	≤0.035	-	≤1.00	-	0.1	Cu:1.0-2.0
Duplex	2205	S32205	≤0.03	22.0-23.0	4.5-6.5	≤2.00	≤0.030	≤0.020	3.0-3.5	≤1.00	-	0.14-0.20	-
	2507	S32750	≤0.03	24.0-26.0	6.0-8.0	≤1.20	≤0.035	≤0.020	3.0-3.5	≤0.80	0.5	0.24-0.32	-
	*	S32760	≤0.03	24.0-26.0	6.0-8.0	≤1.00	≤0.030	≤0.010	3.0-4.0	≤1.00	0.5-1.00	0.2-0.3	-
	2304	S32304	≤0.03	21.5-24.5	3.0-5.5	≤2.50	≤0.040	≤0.030	0.05-0.6	≤1.00	0.05-0.6	0.05-0.2	-
	329	1.4460	≤0.08	23.00-28.00	2.00-5.00	≤1.00	≤0.040	≤0.030	1.00-2.00	≤0.75	-	-	-
Ferrite	409	S40900	≤0.03	10.50-11.70	0.5	≤1.00	≤0.040	≤0.020	-	≤1.00	-	≤0.030	Ti6（C+N)-0.50 Nb:0.17
	430	1Cr17	≤0.12	16.00-18.00	-	≤1.00	≤0.040	≤0.030	-	≤1.00	-	-	-
	444	S44400	≤0.025	17.50-19.50	1	≤1.00	≤0.040	≤0.030	1.75-2.5	≤1.00	-	0.035	-
	446	S44600	≤0.20	23.00-27.00	0.75	≤1.50	≤0.040	≤0.030	1.50-2.50	≤1.00	-	≤0.25	-
Martensite	410	1Cr13	0.08-0.15	11.50-13.50	0.75	≤1.00	≤0.040	≤0.030	-	≤1.00	-	-	-
	410S	*	≤0.080	11.50-13.50	0.6	≤1.00	≤0.040	≤0.030	-	≤1.00	-	-	-
	416	Y1Cr13	≤0.15	12.00-14.00	3.0	≤1.25	≤0.060	≥0.15	-	≤1.00	-	-	-
	420	2Cr13	≥0.15	12.00-14.00	-	≤1.00	≤0.040	≤0.030	-	≤1.00	-	-	-
	420J2	3Cr13	0.26-0.35	12.00-14.00	-	≤1.00	≤0.040	≤0.030	-	≤1.00	-	-	-
	431	1Cr17Ni2	≤0.20	15.00-17.00	1.50-2.50	≤1.00	≤0.040	≤0.030	-	≤0.80	-	-	-
	440C	11Cr17	0.95-1.20	16.00-18.00	-	≤1.00	≤0.040	≤0.030	0.75	≤1.00	-	-	-
PH	630	17-4PH	≤0.07	15.00-17.50	3.00-5.00	≤1.00	≤0.035	≤0.030	-	≤1.00	3.00-5.00	-	Nb 0.15-0.45
	631	17-7PH	≤0.09	16.00-18.00	6.50-7.50	≤1.00	≤0.035	≤0.030	-	≤1.00	≤0.50	-	Al 0.75-1.50
	632	15-5PH	≤0.09	14.00-16.00	3.50-5.50	≤1.00	≤0.035	≤0.030	2.00-3.00	≤1.00	2.5-4.5	-	Al 0.75-1.50

Unfold

Send Message

Hot Products

Stainless Steel

Nickel Alloy

Carbon Steel

Stainless Steel Plate

Stainless Steel Pipe

Hastelloy

Incoloy

Inconel

Monel

Stainless Steel

Stainless Steel Strip

Specification:

A.Precision stainless steel strip

B.Cold-rolled stainless steel strip

Introduce:

Standard AISI Types of Edges

Chemical Composition

Send Message

Hot Products

Hot Rolled Stainless Steel Coil

Cold Rolled Stainless Steel Coil

Austenitic Stainless Steel Plate

Seamless Stainless Steel Pipe

Professional metal material supply chain Your one-stop supplier of stainless steel